Page 2 For technical questions, please call 1-888-866-5797. Item 5907
Specifications
Maximum Workpiece Width 30 IN.
Maximum Workpiece Thickness 20 Gauge
Roll Diameter 1-1/2 IN.
Wire Forming Grooves 5/32, 11/64, and 7/32 IN.
Die Sizes 1, 2, 3, 6, 8, and 10 IN.
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
To Next Page
Loading...