Need help?Do you have a question about the Central Machinery 61318 and is the answer not in the manual?
General| Brand | Central Machinery |
|---|---|
| Model | 61318 |
| Category | Grinder |
| Language | English |
Keep manual for future reference and record serial number.
Crucial warning to read material before use to prevent serious injury.
Guidelines for selecting and using appropriate extension cords based on amperage and length.
Requirement to wear ANSI-approved safety glasses during operation.
Ensure the switch is off before plugging in to avoid accidental startup.
Check for alignment, binding, or breakage in parts before using the tool.
Use matching outlets, do not modify plugs, and avoid adapters.
Use 3-wire extension cords with grounding plugs and receptacles.
Repair or replace damaged or worn cords immediately.
Use correct wheels, replace cracked ones, maintain guards, and set work rest distance.
Wear ANSI-approved eye and NIOSH-approved breathing protection.
Warnings about chemicals in dust/cord and recommended precautions.
Medical advice for users and avoiding smoking to reduce vibration-related risks.
Use lowest vibration tools, include breaks, grip lightly, and maintain the tool.
How to install and adjust the work rests for proper wheel clearance.
Steps for attaching spark guards, shield arms, and eye shields.
Detailed steps for safely removing and installing grinding wheels, including the ring test.
Importance of using gaskets, proper flange placement, and avoiding overtightening.
How to designate a clean, well-lit work area and route the power cord safely.
Steps for turning on the tool, applying workpiece, and post-operation cleanup.
How to inspect the tool before use, clean after use, and maintain motor vents.
Guidelines for handling and storing grinding wheels and accessories safely.
A comprehensive list of all parts with descriptions and quantities.
To Next Page
