Central Pneumatic 53176 User Manual

1/2” Air Impact Wrench
Model 53176
Assembly and Operating Instructions
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright
©
1998, 2004 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be
reproduced in any shape or form without the express written consent
of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
®
®
REV 07/04

Central Pneumatic 53176 Specifications

General

Brand	Central Pneumatic
Model	53176
Category	Impact Driver
Language	English

Summary

Safety Warnings and Precautions

Keep Children Away

Prevent children from accessing or handling tools and machinery in the work area.

Use Eye and Ear Protection

Always wear approved safety goggles and hearing protection during operation.

Disconnect Power Before Servicing

Unplug tools from power sources when not in use or before performing maintenance.

Avoid Unintentional Starting

Confirm the switch is off before plugging in and avoid holding the trigger.

Check for Damaged Parts

Inspect all parts for damage or misalignment before use; repair or replace as needed.

Guard Against Electric Shock

Prevent body contact with grounded surfaces to avoid electrical hazards.

Avoid Alcohol and Drug Influence

Do not operate tools under the influence of alcohol or drugs that impair judgment.

Operation

Loosening

Loosen Nut Procedure

Place socket, set reverse valve, and press trigger firmly to loosen the nut.

Tightening

Tighten Nut Procedure

Maintenance