EasyManua.ls Logo

Central Pneumatic 67698 - Air Compressor Safety; Fire and Explosion Risks; Bursting Risks; Injury Risks

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For technical questions, please call 1-800-444-3353.SKU 67698
Use Safety Guard for Pulleys. 





Avoid burns.  



Air Compressor Safety Warnings
Risk of re or explosion - do not 
spray ammable liquid in a conned
area or towards a hot surface. Spray
area must be well-ventilated. Do not
smoke while spraying or spray where
spark or ame is present. Arcing
parts - keep compressor at least 20
feet away from explosive vapors,
such as when spraying with a spray
gun.
Risk of bursting - do not adjust 
regulator higher than marked
maximum pressure of attachment.
Risk of injury - do not direct air 
stream at people or animals.
Do not use to supply breathing air.
Do not leave compressor unattended 
for an extended period while plugged
in. Unplug compressor after working.
Keep compressor well-ventilated. Do 
not cover compressor during use.





























RECOMMENDED MINIMUM WIRE
GAUGE FOR EXTENSION CORDS
(120 VOLT)
NAMEPLATE
AMPERES
(at full load)
EXTENSION CORD
LENGTH
25’ 50’ 100’ 150’
0 – 6 18 16 16 
 18 16 Do not use.
 16 16 Do not use.
  12 Do not use.
TABLE A








Other manuals for Central Pneumatic 67698

Related product manuals