Central Pneumatic 96677

To Next Page

AIR VACUUM PUMP WITH

R134A & R12/22

Model

96677

SET UP AND OPERATING INSTRUCTIONS

To prevent explosion, serious injury, and death:

Service of air conditioning systems must be done

only by trained and experienced technician to avoid



Technicians opening refrigeration circuit in

automotive air conditioning systems MUST be



procedures in compliance with section 609 of Clean



For additional information regarding ozone depletion

and air conditioning service regulations, visit EPA’s



•





Distributed exclusively by Harbor Freight Tools



Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2007 by Harbor Freight Tools



manual or any artwork contained herein may be reproduced in any shape or form



For technical questions or replacement parts, please call 1-800-444-3353.

Main Page

Need help?

Do you have a question about the Central Pneumatic 96677 and is the answer not in the manual?

Summary

General Safety Rules

Work Area Safety

Keep work area clean, well-lit, and free of distractions to prevent accidents.

Personal Safety

Stay alert, use safety equipment, dress properly, and use vapor collection if provided.

Pneumatic Tool Use and Care

Use the correct tool, disconnect from the air source before adjustments, and store properly.

Specific Safety Rules

Specifications

Unpacking

Operating Instructions

General Operating Instructions

Instructions for operating the air vacuum pump, including connecting hoses and running the system.

Maintenance and Servicing

Cleaning, Maintenance, and Lubrication

Inspect tool condition before use and clean external surfaces after use.

Parts List & Assembly Diagram

Limited 90 Day Warranty