SKU 96677 For technical questions, please call 1-800-444-3353.
this Air Vacuum Pump and run for 10 minutes to further raise the vacuum level in
Attach an air pressure hose (not included) to the Air Fitting either by threading it
Allow the pump to draw vacuum on the system for approximately 10 minutes to
The gauge (not included) should show negative pressure and maintain that
MAINTENANCE AND SERVICING
Unplug the tool from the air outlet before performing any
inspection, maintenance, or cleaning procedures.
Damaged equipment can fail, causing serious personal
injury. Do not use damaged equipment. If abnormal noise or
vibration occurs, have the problem corrected before further
use.
Cleaning, maintenance, and lubrication
BEFORE EACH USE,
screws, cracked or broken parts, and any other condition that may affect its safe
AFTER USE,
WARNINGWARNING
To Next Page
Loading...
