CentralPneumatic 62381 - User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2014 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15g
NOTICE
CLEAN IMMEDIATELY
Clean the Spray Gun IMMEDIATELY
after EVERY use, in between coats,
and when it will be idle for
more than 5 minutes.
Delayed or inadequate cleaning will
permanently clog the Spray Gun.

Summary

Important Safety Instructions

Personal Safety Precautions

Tool Use and Care Guidelines

Specific Safety Instructions

Hazardous Materials and Chemical Warnings

Safety guidelines for spraying hazardous materials and specific chemical warnings.

Air Supply Setup Guide

Safe Air Connection

Critical warnings and procedures for setting up the air supply safely.

Spray Gun Setup and Adjustment

Fluid Flow Adjustment

Procedure for adjusting the fluid flow rate.

Spraying Technique Essentials

Mastering Spray Application

Essential techniques for achieving good spraying results.

Spray Gun Cleaning Procedures

Solvent Use and Selection

Guidelines for selecting and using cleaning solvents.

Post-Use Cleaning Steps

Detailed steps for cleaning the spray gun after each use.

Spray Pattern Troubleshooting

Diagnosing Pattern Defects

Diagnosing and resolving common spray pattern problems.

General Troubleshooting Guide

Solving Spray Gun Issues

CentralPneumatic 62381 Specifications