Centroid Acorn Plasma Users Manual Beta CNC12 v4.65 rev6
Plasma Smoothing Presets
The Centroid CNC12 G-code smoothing feature will round sharp corners of a G-code program which produces
smooth machine tool motion through that sharp geometry which results in better cuts. Centroid has developed and
provides a default a set of Plasma Smoothing Profiles. The default set of values will work well with most typical
Plasma G-code programs. There are two factory plasma smoothing profiles. “Contouring Plasma” which works
best with art work. And “Precision Plasma” which works best with job shop type work.
Examples. Use “Contouring Plasma” smoothing with jobs like this.
Use “Precision Plasma” smoothing with jobs like this.
Page 39 D:\Keith Documents\centroid_acorn_plasma_users_manual_draft27.odt rev27 3-15-22
To Next Page
Loading...