To Next PageTo Next Page
Need help?Do you have a question about the Centrometal EKO-CK P 20 and is the answer not in the manual?
General| Brand | Centrometal |
|---|---|
| Model | EKO-CK P 20 |
| Category | Boiler |
| Language | English |
General overview of the boiler's construction, design, and EN 303-5 certification.
Describes the boiler as a hot water pellet boiler made of steel with automatic pellet supply.
Lists the main boiler body and specific kits included upon delivery.
Introduction to the essential components that make up the boiler system.
Details the steel construction of the boiler body, emphasizing heating surface and ease of cleaning.
Information on the CPPL pellet burner, covering its power ratings and operational features.
Explains the functions and characteristics of the sophisticated digital boiler controller.
Describes the Archimedean spiral mechanism for transporting pellets from tank to burner.
Details the positioning and mounting requirements for the pellet storage tank.
Guidelines for correctly positioning the boiler on a solid surface and ensuring proper ventilation.
Instructions on how to change the left or right opening direction of the upper and lower boiler doors.
Steps for installing the extension kit for pellet burner installation on the lower boiler door.
Instructions for correctly placing fireclay boards on the water-cooled grate in the firebox.
Requirements and procedures for connecting the boiler to a properly dimensioned and built chimney.
Detailed steps for mounting different pellet burner models (CPPL-14/35, CPPL-40/50, CPPL-90).
Procedure for installing the pellet controller, connecting sensors, and wiring.
General procedures and norms for connecting the boiler to closed and open central heating systems.
Specific installation requirements for closed heating systems, including safety valves and expansion vessels.
Specific installation recommendations for open heating systems, including expansion vessel placement.
Overview of basic schemes for installing the boiler in closed and open heating systems.
Instructions for installing thermal protection (heat exchanger and valve) in closed heating systems.
Connecting the boiler's DHW tank to the water supply, including required safety components.
Final checks and procedures required before operating the boiler, including safety and configuration.
Recommended properties for wooden pellets used as fuel in the boilers.
Guidelines and safety precautions for operating the boiler correctly and safely.
Procedures for cleaning the boiler and accessories when firing with wood pellets.
