To Next PageTo Next Page
Need help?Do you have a question about the Centrometal BioTec-L and is the answer not in the manual?
General| Brand | Centrometal |
|---|---|
| Model | BioTec-L |
| Category | Boiler |
| Language | English |
Guide to operating the boiler's control unit.
Procedure for turning on the boiler and initial screen display.
Overview of main menu options and icons.
Description and function of all physical and on-screen buttons.
Explanation of symbols used on the boiler control display.
Setting up general connection schemes for boiler components.
Default configuration with all components unselected.
Details of components selected for Configuration 2.
Details of components selected for Configuration 3.
Details of components selected for Configuration 4.
Details of components selected for Configuration 5.
Details of components selected for Configuration 6.
Details of components selected for Configuration 7.
Details of components selected for Configuration 8.
Details of components selected for Configuration 9.
Details of components selected for Configuration 10.
Setting the time for mixing valve opening/closing.
Inputting opening time for the protection valve.
Introduction to temperature parameters available in the main menu.
Setting the desired boiler operating temperature.
Defining the temperature difference for boiler operation phases.
Setting the minimum temperature for the buffer tank.
Configuring the desired domestic hot water temperature.
Setting the temperature difference for DHW pump activation.
Setting minimum temperature for hydraulic crossover pump.
Enabling or disabling the heating circuit motor drive.
Setting the heating curve coefficient for temperature regulation.
Adjusting the influence of room corrector on flow temperature.
Setting the desired day time room temperature.
Setting the desired night time room temperature.
Choosing between day, night, or table temperature modes.
Setting daily temperature schedules using tables.
Defining transition time between day and night temperature modes.
Setting day room temperature when using a corrector.
Setting night room temperature when using a corrector.
Choosing temperature modes with corrector functionality.
Configuring temperature tables with corrector.
Setting desired boiler return temperature.
Viewing lists of system errors and warnings.
Managing system configurations via file operations.
Performing manual tests on boiler components.
Steps for testing the protection valve's functionality.
Verifying alarm output configuration and connections.
Checking the operation of the lambda probe.
Enabling flue gas measurement at nominal power.
Safely stopping all boiler processes.
Configuring how the control unit alerts users to errors.
Setting signal types for error reporting.
Setting signal types for fuel level warnings.
Configuring warnings for low buffer tank temperature.
Defining delays for alarm signals.
Selecting tables for alarm output behavior.
Setting alarm types and schedules for Table 1.
Enabling protection against pump/valve blocking during stand-still.
Configuring internet supervision via Wi-Fi box.
Entering Wi-Fi network name and password.
Setting time zone and resetting network connection.
Configuring the current date and time.
Managing display settings and screensaver.
Configuring when the screensaver activates or stops.
Enabling or disabling the language selection screen.
Setting the duration of the initial message display.
Setting the volume level for system sounds.
Selecting different types of system sounds.
Turning system sound alerts for display, errors, and warnings on/off.
Accessing information about software version and boiler power.
Enabling or disabling glow maintenance for efficient re-ignition.
Accessing the installation menu requires a PIN.
Information on cleaning intervals and procedures.
Details on controlling heating circuits with CM2K.
Conditions under which Pump P1 operates.
Step-by-step guide for successful boiler ignition.
Instructions for loading wood and preparing the firebox.
Waiting for flue gas temperature to reach required levels.
Procedure for refilling the fuel chamber.
Steps to take when glow is not sufficient for refilling.
Explanation of different boiler operating states.
Specific conditions and transitions for operation phases.
Definitions and conditions for various boiler operation phases.
Parameters that cause the boiler to switch off.
Understanding error/warning codes and names on the main screen.
Troubleshooting DHW sensor errors and their impact.
Troubleshooting buffer tank sensor errors (up/down).
Troubleshooting flue gas sensor errors.
Troubleshooting external temperature sensor errors.
Troubleshooting main flow sensor errors.
Troubleshooting return flow and boiler sensor errors.
Troubleshooting boiler power and fan errors.
Troubleshooting lambda probe errors.
Troubleshooting CM2K circuit sensor and corrector errors.
Troubleshooting CM2K corrector and firebox sensor errors.
Troubleshooting room corrector errors.
Troubleshooting disconnected firebox sensor.
Troubleshooting hydraulic switch sensor errors.
List of common warning messages and their causes.
Details on warnings like fan off or low return temperature.
Information logged for events like ignition or power loss.
How the safety thermostat interrupts fan operation.
Troubleshooting phase display issues when the upper door is closed.
Enabling intervention mode if RPM sensor is faulty.
Understanding when the P1 pump operates and its limitations.
