Centurion G-SPEAK - G-SPEAK Special Commands

page 30
Settings ParametersDescription
Output
Settings
CO
OU3PT – Sets Output 3 pulse time in
milliseconds
OU4PU – Sets Output 4 as pulsed
OU4LA – Sets Output 4 as latched
OU4PT – Sets Output 4 pulse time in
milliseconds
OU1N – Sets an alternative name for
OU1
OU2N – Sets an alternative name for
OU2
OU3N – Sets an alternative name for
OU3
OU4N – Sets an alternative name for
OU4
OU1PU – Sets Output 1 as pulsed
OU1LA – Sets Output 1 as latched
OU1PT – Sets Output 1 pulse time in
milliseconds
OU2PU – Sets Output 2 as pulsed
OU2LA – Sets Output 2 as latched
OU2PT – Sets Output 2 pulse time in
milliseconds
OU3PU – Sets Output 3 as pulsed
OU3LA – Sets Output 3 as latched
Output
Settings
Settings Parameters

CT (Call Time) – Sets the maximum
duration of the call (the call can be
terminated earlier by either party)

RT (Ring Time)– Sets the time before
which the unit will disconnect if a call is
unanswered

HT (Hang Time) – Sets the time for
which the call remains connected after
a DTMF event
Sub-parameters:

Call time (seconds)

Ring time (seconds)

Hang time (seconds)
Description
Call
settings
CO
Configure inputs,
outputs and system
settings
CO