Centurion G-SPEAK - Page 34

page 31
Settings ParametersDescription
IN1RM – The message to be sent to
subscribed numbers when IN1
rises
IN2FM – The message to be sent to
subscribed numbers when IN2
falls
IN2RM – The message to be sent to
subscribed numbers when IN2
rises
IN3FM – The message to be sent to
subscribed numbers when IN3
falls
IN3RM – The message to be sent to
subscribed numbers when IN3
rises
CO
IN1 – Input 1 configured as input
IN2 – Input 2 configured as input
IN3 – Input 3 configured as input
IN4 – Input 4 configured as input
IN1FT – Sets Input 1 Filter Time in
milliseconds
IN2FT – Sets Input 2 Filter Time in
milliseconds
IN3FT – Sets Input 3 Filter Time in
milliseconds
IN4FT – Sets Input 4 Filter Time in
milliseconds
IN1BT – Sets Input 1 Blanking Time in
milliseconds
IN2BT – Sets Input 2 Blanking Time in
milliseconds
IN3BT – Sets Input 3 Blanking Time in
milliseconds
IN4BT – Sets Input 4 Blanking Time in
milliseconds
IN1FM – The message to be sent to
subscribed numbers when IN1
falls
Input
Settings
CO
Sub-parameters:

Pulse time (milliseconds) 1s = 1000ms

Output name (up to 31 characters
including spaces)
Input
Settings