II-4
Section II - SPECIFICATIONS (Cont'd)
2.4 SPECIFICATIONS - EB-4/6500 WHEEL LIFT (cont'd)
(b) Wheel Lift Ratings
Description "L" Arm Rating Lift Fork Rating
Wheel Lift Position STD OPT. STD
Retracted 4,000 lbs. 6,000 lbs. 9,000 lbs.
T.E.M.A. 4,000 lbs. 6,000 lbs. 7,000 lbs.
Extended 4,000 lbs. 6,000 lbs. 6,500 lbs.
Tow Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20,000 lbs.
2.5 CHASSIS RECOMMENDATIONS
Century EB-4/6500 should be installed on a chassis with a minimum
GVW of 17,500 lbs., dual rear wheels, and a minimum C.A. of 84". A
heavy duty spring package is recommended.
2.6 STANDARD EQUIPMENT
• Integrated Boom & Wheel Lift System
• Variable Speed Hydraulic Winches
• 6 x 25 IWRC, XXIPS 7/16" x 100' Wire Rope Each Winch
• Power Fold for Stinger Storage
• 360° Direcional Boom End Swivels
• Power Boom Elevation with Holding Valve
• Power Boom Extension
• 3” Short Lift Forks and Fork Holders
• 3-Way Pivot "L" Arm System
• Lubrication Fittings on all Shafts and Other Moving Parts
• 90" Wide Body with 2 Tool Compartments per side and 9" Sills
• Tunnel on Front Compartment
• Dual Control Stations
• Federal Standard 108 Lighting
• Wiring Harness with Junction Box
• Back Up Alarm
To Next Page
Loading...