CEPTER TAB 10L - Speci Cations

6
●Pack Contents
Quickguide
EN
Tablet ×1PC
Power Adapter ×1PC
Type-C USB Cable ×1PC
●Specications
ROM 32GB, RAM 2GB
CPU MTK8168 Quad-core
5.0MP rear-facing camera
2.0MP front-facing camera
10.1” IPS 1280*800, 10-point touch
Wireless 802.11 b/g/n/ac, BT, GPS, FM
Power Input:100-240V~, 50/60Hz, 0.35A MAX
●ChargingtheTablet
PleasechargeyourTabletfullybeforeusingitforthersttime.
a. ConnecttheUSB-Cplugonthesuppliedpoweradaptertothe chargingsocket(USB-C)
ontheTablet.
b.Thenplugthepoweradapterintoasocket.
→Only leavethepoweradapterconnectedtothesocketuntilthe batteryoftheTabletis
fullycharged.Inaddition,alwaysdisconnect thepoweradapterfromtheTabletwhenyou
arenotchargingthe Tablet.
●TurningontheTabletforthersttime
A. Presstheon/oswitchforapproximately5seconds.TheTabletwill startupandthe
setupassistantwillappearonthescreen.
B. FollowthesetupassistantinstructionstosetupyourTablet.Your Tabletwillbecong-
uredonceyoucompletethesetupassistant. Thismaytakeafewminutes.Donotswitcho
theTabletduring thisperiod!
C. Setupapassword.
→EachtimeyouturnontheTabletaftersettingitup,thelockscreen willappearduring
startup.Tounlockthescreen,dragthelock screenupwardsfrombottomtotopwithyour
ngertipandinsert yourpassword.