CEPTER TAB 10L - Page 8

8
EN
●Reset
If the Tablet “freezes” and no longer responds, you can press the “power on/o” button for
5 seconds to restart the device.
If the Tablet still does not respond, then a factory reset is necessary. Press the RESET button
with a suitable item (e.g. paper clip) to reset the device.
Google, Android, Google Play, Google Chrome and other marks are trademarks of Google
LLC.
●Standby
Briey press the on/o switch on the device to activate the standby mode. Press it again
quickly to take the Tablet out of standby mode.
●Shutting down
a. Press the on/o switch for approximately 2 seconds. A selection window appears.
b. Tap “Power o” in the selection window. The Tablet shuts down and turns o.
●Saving energy
■Deactivate the WiFi function when it is not in use.
■Only leave the power adapter connected to the socket until the Tablet’s battery is fully
charged. In addition, always disconnect the power adapter from the Tablet when you are
not charging the Tablet.
■Reduce the display brightness under “Display” → “Brightness level in the settings.
■Activate standby mode or turn o the Tablet completely if you are not using the Tablet.
Switching o the Tablet