1413
03
1. Safely remove all the parts enclosed in the box.
(Please make sure that there are no parts left behind.)
2. Place it on a flat surface to avoid scratching.
3. Lay the product forward, and then insert the center connecting
support into the groove on the bottom of the product.
4.
Slide the “Five-leg supporting board” all the way into the coupling groove.
5.
Plug the connector to the sockets and turn the fastern to the right
to fix it firmly.
* When installation, you must slowly drop the product.
If you put it down suddenly, there is a risk of damage
or injury to the product.
Assembly Method
Center connecting
support
Joint
support
Joint
groove
Body
Five-foot
support
Foot rest
rubber
* Caution: Fit the first side of the 'center connecting support' to the fixing device.
To Next Page
Loading...
