4
WARNING
When using the probes, keep your fingers behind the finger
guards on the probes.
Connect the black test lead before you connect the red test
lead. When you disconnect test leads, disconnect the red test
lead first.
Remove the test leads from the meter before you open the
battery cover or the case.
Do not operate the meter with the battery cover or portions
of the case removed or loosened.
To avoid electric shock, do not touch any naked conductor
with hand or skin, and do not ground yourself while using the meter.
Remaining endangerment:
When an input terminal is connected to dangerous live
potential it is to be noted that this potential at all other
terminals can occur!
CAT III
−
j.
k.
l.
m.
n.
o.
p.
Measurement Category III is for measurements performed
in the building installation. Examples are measurements on
distribution boards, circuit breakers, wiring, including
cables,bus-bars, junction boxes, switches, socket-outlets in the
fixed installation, and equipment for industrial use and some other
equipment, for example, stationary motors with permanent
connection to the fixed installation.
Do not use the meter for measurements within Measurement
Categories IV.
To Next Page
Loading...