Cervis Warrior CB-9X Series - User Manual

2019 Cervis, Inc.
CB-9X Console Box
Transmitters
Manual U103.1.0
™

Summary

Cervis Inc. Safety Precautions

Warrior CB-9 X Transmitter Introduction

Key Features of Warrior CB-9 X Transmitter

Warrior CB-9 X Console Box Transmitters

Warrior CB-9 X Diagnostic and Status LEDs

Advanced LED Diagnostics Explained

Warrior CB-9 X Battery Installation and Replacement Guide

Provides step-by-step instructions for installing and replacing C-cell batteries.

How to Turn On the CB-9 X Transmitter

Outlines the procedure for powering on the CB-9X transmitter using keyswitch and pushbuttons.

How to Turn Off the CB-9 X Transmitter

Describes methods for safely shutting down the CB-9X transmitter.

Warrior CB-9 X Neck and Shoulder Harness

Associating CB-9 X with System Receiver

CB-9 X Receiver Association Process

Clearing CB-9 X Stored Receiver ID (Factory Reset)

CB-9 X Factory Reset Procedure

Details the procedure for performing a factory reset to clear the stored receiver ID.

Warrior CB-9 X Console Box Technical Specifications

Cervis Warrior CB-9X Series Specifications

General

Model Series	CB-9X Series
Category	Transmitter
Frequency Range	400-470 MHz
Frequency Stability	±2.5ppm
Audio Output Power	1W
Features	Scan Function
Antenna Impedance	50Ω
RF Output Power	5W
Channel Spacing	25KHz/12.5KHz
Audio Distortion	<5%
Receiver Sensitivity	≤0.25μV