Cervis Warrior HHMS-9XW08 - User Manual

Product Manual
Industrial wireless remote control solutions with
customer service that is always within reach.
HHMS-9XW08
LOGOS Transmitter
2 Pushbuttons, 8-Stepped Buttons with Display
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
SOLIDS LIQUIDS
6 7
IP RATING
MADE IN
_________
SINCE 1992
MADE IN
_________
SINCE 1992

Summary

Cervis, Inc. Safety Precautions

General Safety Precautions

Operational safety, wiring, modifications, legal compliance, maintenance, cleaning, environmental.

1.0 Warrior HHMS-9 XW08 Transmitter Introduction

Transmitter Overview and Features

2.0 HHMS Battery Installation

Battery Installation Procedure

3.0 System Startup and Shutdown

System Startup Procedure

System Shutdown Procedures

3.1 HHMS-9 XW08 Battery Warning and Shutdown

4.0 Charging the Battery Pack

Battery Charging

Charging Methods

5.0 HHMS-9 XW08 LEDs

LED Indicators and Troubleshooting

5.1 HHMS-9 XW08 OLED Display On-Screen Icons

OLED Display Icons and Meanings

6.0 Maintenance Mode

Entering Maintenance Mode

Associating Transmitter with Receiver

Process to link transmitter to receiver using FCFS.

6.1 Associating a Transmitter with a Receiver

Association Procedure Steps

Steps to associate transmitter with receiver via startup and Maintenance Mode.

Receiver Selection and Confirmation

Buttons B3/B4 for Association Mode, B9 cycle, B10 confirm.

Tandem Association and Testing

Summary for tandem systems, linking RX B, testing functions.

6.2 Clearing HHMS-9 XW08 Stored Receiver ID (Factory Reset)

Factory Reset Procedure

Steps to clear stored receiver IDs via startup and Maintenance Mode.

6.3 HHMS-9 XW08 Inactivity Timeout Configuration

Inactivity Timeout Configuration

Timeout Period Selection

7.0 HHMS-9 XW08 Tandem Operation Receiver Select

Tandem Operation Overview

Control two receivers simultaneously; select via B9 and B10.

Selecting Receiver A or B

Steps to select Receiver A (B10) or Receiver B (B9 then B10).

Selecting Both Receivers

HHMS-9 XW08 LOGOS WARRIOR TRANSMITTER

Cervis Warrior HHMS-9XW08 Specifications

General

Brand	Cervis
Model	Warrior HHMS-9XW08
Category	Transmitter
Language	English