Product details
Product guide – CESAB S200
59
Duplex Tele Openview
This mast uses two mast sections with two cylin-
ders positioned along the sides. Available on S210,
S212, S212L, S212S, S214, S214L and S220D.
For the S220D there are some limitations: the two
low masts (Lh 1700 and 1900 mm) with free-view
option can only be selected in combination with
the sideways battery change option. The Open-
view mast with Lh 2100 mm can be ordered with
any battery size, but the battery hood needs to be
removed to change the battery.
Feature
The Duplex Tele Openview masts are designed
with two chains and cylinders placed far apart on
the sides.
Benet
This optimises operator visibility, while rendering
fork positioning safe and easy.
Feature
The Duplex Tele Openview masts offer a free-lift range of 76 mm.
Benet
This enables horizontal transport of goods wit-
hout raising the mast and increasing its minimum
height. Especially useful if the site has low ceiling
clearance or doorways.
Duplex Free lift
A two-section mast with maximum free-lift range.
Available on S212, S212L, S212S, S214 and
S214L.
Feature
The minimum height of the mast only starts to
increase when the back of the fork carriage reaches
the top of the inner mast section. This means that
masts with a higher lift height also have a higher
free-lift.
To Next Page
Loading...
Need help?
General
