Product details
Product guide – CESAB S200
60
Benet
The Duplex Free lift mast combines high lift heights with a low mast height. As
such, the Free lift mast is suitable for stacking applications in halls with limited
ceiling heights, on covered lorries and where the truck must pass through doorways
with low clearance.
Feature
Only one centrally placed cylinder and two smaller ones on the sides.
Benet
Excellent view through the mast.
Triplex Free lift
A three-section mast with maximum free-lift
range. Available on S212, S212S, S212L, S214
and S214L.
Feature
The minimum height of the mast only starts to
increase when the back of the fork carriage reaches
the top of the inner mast section. This means that
masts with a higher lift height also have a higher
free-lift.
Benet
The Triplex Free lift mast combines very high lift heights with a very low mast
height. Because of this, the Triplex Free lift mast is well suited for stacking appli-
cations in halls with limited ceiling heights and operation on covered lorries.
To Next Page
Loading...
Need help?
General
