Cessna Citation XLS - MFD Control Selections; Range, Checklist, and Navigation Controls

Range Controls The MFD range controls are active only when WX is not selected for display.
(INC and DEC) Selectable ranges (in the MAP mode) are 2.5, 5, 12.5, 25, 50, 100, 150, 300,
and 600 NM. The switch position labeled INC increases the selected range,
and DEC decreases the selected range. In PLAN mode the ranges are 5, 10,
25, 100, 200, 300, 600, and 1200 nautical miles. In WX mode this selector is
inactive. Default mode is 100- nautical mile range with MAP selected.
NORM
When this button is pressed, the MFD will display the index page containing
the lowest numbered uncompleted or unskipped normal checklist with the
active line at that checklist.
While operating in this mode, as a checklist is completed, the system will
automatically step to the next uncompleted procedure of the index.
EMER
Actuation results in the display of the first page of the emergency checklist
index.
RCL
The function of this button depends upon the type of MFD display.
MAP or PLAN Recalls the designator to its home position, or if the designator is at its home
position, moves it to present position.
TEXT
Recalls the lowest numbered skipped line in a checklist by changing the
active page and/or line.
SKP
The function of this button depends upon the type of MFD display.
MAP or PLAN Skips the designator to the next waypoint. If the designator is not at the
home position, the displacement line will be moved to the next waypoint.
TEXT
Actuation skips the active line in a checklist or index and advances the active
selection to the subsequent line. If the line skipped is the last line, the active
selection will revert to the lowest numbered skipped line.
PAG
Actuation advances the page count and places the active line selection at
the first line of the page. Actuation with the last page displayed will result in
display of the lowest numbered page containing a skipped line with the
active line selection at the lowest numbered skipped line.
ENT
The function of this button depends upon the type of MFD display.
MAP or PLAN With the designator moved from its home position, actuation of these buttons
will enter the designator LAT/LON as a waypoint in place of the TO waypoint.
TEXT
Actuation checks off a line in a checklist or selects an index line item for
display.
Cessna Citation XLS - Instrumentation & Avionics
Page 65