EasyManua.ls Logo

cetis Telematrix 3500IP MWB - User Manual

cetis Telematrix 3500IP MWB
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3500IP SIP 2
USER GUIDE
3500IP MWB, 3500IP MWD5, 3500IP MWD,
3502IP MWD5, 3502IP MWD, 3500TRM-IP, 3502TRM-IP
a brand
Question and Answer IconNeed help?

Do you have a question about the cetis Telematrix 3500IP MWB and is the answer not in the manual?

Summary

Quick Start

1. Introduction

1.1 Hardware Overview

Details the physical components of the phone base and handset.

1.2 Software Overview

Details the phone's software features, configuration methods, and specifications.

1.3 Button and Hardware Functions

Explains the functions and displays of various buttons and hardware components on the phone.

2. Operating Method for Dialing

2.1 How to Dial a Phone

Guides users on placing calls using the handset or speakerphone.

2.1.2 Call Hold and Resume

Explains how to place calls on hold and retrieve them.

2.1.3 Volume Control

Instructions on adjusting the audio volume up and down.

2.1.7 Call Transfer

Explains how to perform blind and attended call transfers.

3. Web Interface Settings

3.1 Network Parameters Summary

Displays an overview of network and VoIP settings on the phone's web interface.

3.2 Network Settings

Provides access to configure various network connection settings.

3.2.1 WAN Settings

Details settings for the Wide Area Network (WAN) interface.

3.2.8 LAN Settings

Settings for the Local Area Network (LAN) port and its modes.

3.3 VoIP Settings

3.3.1 Primary Register

Setup for the primary SIP account registration on the phone.

3.3.3 Call Features

Configuration of call features, speed dial, and message waiting.

3.3.4 Dialing Rules

Manages dial rules, including end-digit behavior and auto-dial timing.

3.3.5 Multicast Paging

Configures multicast paging functionality for notifications.

3.4 QoS and VLAN Settings

3.5 Provisioning

Methodology for programming the phone with configuration files and firmware.

3.5.1 Provisioning Options

Details options for automatic phone provisioning via DHCP or redirection.

3.5.4 WebUI Management

Manages phone configuration files and firmware versions via the web interface.

3.6 System Settings

Access to system-level configurations like logging, time, and user management.

3.6.3 User Management

Configure user privileges and authentication settings.

3.6.4 System Actions

Perform system actions like factory reset or reboot.

4. Tech Notes

4.1 LLDP-Tech Notes

Explains Link Layer Discovery Protocol for network provisioning.

4.2 802.1 x-Tech Notes

Details 802.1x for network access control and authentication.

4.3 DHCP Options-Tech Notes

Discusses DHCP options for network and provisioning parameters.

4.4 QuickKey DialPad Shortcuts

Lists useful keypad shortcuts for maintenance and troubleshooting.

Important Safety Instructions

FCC Interference Information

Information regarding FCC compliance and interference.

FCC Part 15 Rules

Details FCC rules for digital devices and interference.

Technical Specifications

cetis Telematrix 3500IP MWB Specifications

General IconGeneral
ConnectivityEthernet
PowerPoE (Power over Ethernet)
LinesUp to 6 lines
Data PortYes
Message Waiting IndicatorYes
MountingDesk or Wall Mountable
ColorBlack
Network Interface10/100 Mbps Ethernet
Supported ProtocolsSIP
Headset PortYes
TypeIP Phone
DisplayLCD
AudioFull Duplex Speakerphone
FeaturesHold, Mute, Redial, Conference, Volume Control, Speed Dial
Power SupplyIEEE 802.3af Power over Ethernet (PoE)
HandsetYes

Related product manuals