EasyManua.ls Logo

CF MOTO 450SR - Starting off

CF MOTO 450SR
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76
Starting O󰀨
Grip the clutch lever, put the vehicle into gear 1, then slowly release the clutch lever while at the same time
gently tighten the throttle�
Shifting, Riding
Grip the clutch lever and release the throttle�
Shift the gearshift lever upward for higher gears as required�
Release the clutch lever and slowly tighten the throttle at the same time to complete the gear shift�
Hold the handlebar at all times with both hands when driving with the throttle tightened�
WARNING
Avoid any abrupt load alterations or strong brake operation, which can cause the vehicle loss of control�
Adjust the speed according to road conditions and situation around you�
When the engine RPM is high, do not shift into lower gears� Release the throttle first and reduce the
engine speed�
All adjustments for vehicle operation should be made when vehicle is being parked�
The passenger must be seated properly on the passenger seat with feet on the rear foot pedals, wearing
a helmet and with other safety protection, and holding onto the operator or grab the handle�
󰀩
󰀩
possible�
When the tires are in a low temperature, their road grip performance is reduced� Be cautious and ride at
an average speed until the tires are at their available temperature�
Do not exceed the maximum full load, which includes the motorcycle, driver, passenger and luggage�

Related product manuals