83
Key Points of Lubrication Schedule:
Check all components at the intervals outlined in the Periodic Maintenance Chart� Items not listed in the
schedule should be lubricated at the general lubrication interval�
• Change lubricants more often under severe conditions, such as being used in wet or dusty
conditions�
• Lubricate before long periods of storage, after pressure washing, or after submerging drive system
Item Specications Method
Engine oil
SAE 10W-40 SJ JASO MA2
SAE 10W-30 SJ / SAE 10W-50 SJ JASO
MA2
Inspect the oil level from the oil view
window�
DOT4
Keep the level between upper and
lower lines�
To Next Page
Loading...
