MAINTENANCE & LUBRICATION
104
KEY POINTS OF LUBRICATION SCHEDULE:
Check all components at the intervals outlined in the Periodic Maintenance Schedule. Items not listed in
the schedule should be lubricated at the general lubrication interval.
• Change lubricants more often under severe use, such as wet or dusty conditions.
• Use All Season Grease on pivot points.
• Lubricate every 500 miles (800 km), before long periods of storage, after pressure washing, or after
submerging drive system.
Item Lubricant Method
Engine oil
SAE 10W-40
SAE 5W-40 / SAE 15W-40
Screw off, clean, insert and pull out
dipstick to check oil level
Brake uid DOT4
Keep level between upper and lower
lines
Front gear case oil
SAE80W-90 GL-5 Oil capacity: 230 mL
Rear gear case oil
SAE80W-90 GL-5 Oil capacity: 250 mL
Suspension pivots and drive
train
All Season Grease
Grease gun - Pump grease until it begins
to ow from the pivot point
To Next Page
Loading...
Need help?
General
