MAINTENANCE & LUBRICATION
136
Rear brake pad inspection
Inspect the brake pads and rear brake discs for damage and
wear. If the pad thickness “a” is less than 1.5mm or the disc
thickness “b” is less than 4.0mm, then have your dealer replace
them. Replacement of brake components requires professional
knowledge. These procedures should be performed by your
dealer.
CAUTION
After servicing:
• Make sure the brakes operate smoothly and that the lever
free play is correct.
• Make sure the brakes do not drag and the brake
operation is not spongy.
• All air is bled from the brake system.
To Next Page
Loading...
Need help?
General
