MAINTENANCE & LUBRICATION
144
Wheels
Wheel removal
1. Loosen the wheel nuts.
2. Elevate the Vehicle and place a suitable stand under
the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
Wheel installation:
1. Install the wheel and the nuts.
2. Lower the Vehicle so that the wheel is on the ground.
3. Tighten the wheel nuts to the specified torque.
NOTE
●Tapered nuts are used for both the front and rear wheels.
Install the nut with its tapered side towards the wheel
●The arrow mark on the tire must point toward the rotating
direction of the wheel.
Wheel nut torque: Front: 70 N
•
m ~ 80 N
•
m ;
Rear: 70 N
•
m ~ 80 N
•
m .
To Next Page
Loading...
Need help?
General
