OPERATION OF YOUR ATV
76
Shifting: Low Gear to High Gear
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake.
3. Shift to ‘H’ by moving the gear selector along the shift guide.
Shifting: to Reverse Gear
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake.
3. Shift to ‘R’ by moving the gear selector along the shift guide.
4. Check behind you for people or obstacles, then release the rear brake pedal.
5. Apply the throttle lever gradually and continue to watch behind you while moving backward.
WARNING
When you shift into reverse, make sure there are no obstacles or people, and the area is safe behind you.
When it is safe to proceed, go slowly.
Shifting: Reverse to Park
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake.
3. Shift to ‘P’ by moving the gear selector along the shift guide.
To Next Page
Loading...
Need help?
General
