OPERATION OF YOUR ATV
82
Place a support under vehicle.
NOTE:
Before jacking ensure that all wheels are locked.
NOTE:
When the brake lock is applied ensure that the vehicle stays securely in place.
WARNING
DO NOT OVERLOAD your jack beyond its rated capacity. Use jack which is designed for use on hard
level surfaces only. Use lifting device only. DO not move or dolly the vehicle while on the jack. Refer to
jack warnings and operating instructions prior to use.
NOTE:
Ensure that 4 WH is engaged and brake is locked.
TYPICAL FROUT UP POINT LOCATION TYPICAL BACK UP POINT LOCATION
To Next Page
Loading...
Need help?
General
