Vehicle Issue Diagnosis
172
1 EPS Indicator
2 EPS Assembly
EPS Malfunction Indicator Light
The Electronic Power Steering system on your vehicle contains a self-diagnostic feature that will illuminate
the malfunction indicator light (MIL) if it detects a problem,when this indicator ashes, please contact your
dealer
.
In normal operation, the EPS indicator will be on after the ignition switch is turned to ON, but EPS
will not work. When the engine is started, the EPS indicator will be o and the EPS starts to function.
Each trouble code consists of 2 digits, denoted by the times of long flash and short flash of EPS MIL
indicator. If there is a failure, the EPS indicator will start to ash. Do NOT switch o the machine. Check
the ash sequence of EPS indicator. Write down the ash sequence and contact your dealer for diagnosis.
Your dealer has the special tool required to diagnose, repair and clear trouble codes. Any codes will
disappear once the problem has been diagnosed and repaired by your dealer.
OPC
1
2
To Next Page
Loading...
Need help?
General
