104
MAINTENANCE
KEY POINTS OF LUBRICATION SCHEDULE:
Check all components at the intervals outlined in the Periodic Maintenance Schedule. Items not lied in the
schedule should be lubricated at the general lubrication interval.
• Change lubricants more often under severe use, such as wet or duy conditions.
• Use All Season Grease on pivot points.
• Lubricate every 500 miles (800 km), before long periods of orage, after pressure washing, or after
submerging drive syem.
Item Lubricant Method
Engine oil
SAE 5W-40
SAE 15W-40 / SAE 10W-40
(See page 75 for oil viscosity chart)
Screw o, clean, insert and pull out
dipick to check oil level
Brake uid DOT4
Keep level between
upper and lower lines
Front gear case oil
SAE80W-90 GL-5
Oil capacity: 7.8 oz. (230 mL)
Rear gear case oil
SAE80W-90 GL-5
Oil capacity: 8.5 oz. (250 mL)
Suspension pivots and drive train All Season Grease
Grease gun - Pump grease until it
begins to ow from the pivot point
To Next Page
Loading...
Need help?
General
