67
FEATURES AND CONTROLS
How To Avoid CVT Drive Belt and Component Failure
CVT clutch and belt life can be dramatically extended by avoiding these common operating mistakes:
Causes CVT damage: Solution:
Attempting to load the vehicle onto a truck bed or tall
trailer in high gear.
Shift transmission to low gear during loading of the
vehicle to prevent belt burning.
Starting out on a steep incline in high gear. When starting out on steep inclines, use low gear.
Constant driving in high gear at low RPM, driving at
just above clutch engagement RPM, or at low speed
(approximately 3mph~6mph [5km/h~10 km/h]).
Low gear is highly recommended for cooler CVT
operating temperatures and longer component
life. Drive at a higher speed or use low gear more
frequently.
Insucient warm-up of CVT exposed to low ambient
temperatures
Warm the engine before driving, the CVT drive belt
will become more exible and prevent belt burning.
Slow throttle and easy CVT engagement. Use the throttle with purpose and effectively for
ecient CVT clutch engagement.
Towing/pushing at low RPM/low ground speed. Use low gear only.
Utility use/plowing snow, dirt, etc. Use low gear only.
Heavy vehicle load operating at low speed Use low gear only.
To Next Page
Loading...
Need help?
General
