71
FEATURES AND CONTROLS
Indicators and Warnings
1
- Tail Lamp ON. Illuminates when the headlight switch is in this position.
2
- High Beam ON. Illuminates when the headlight switch is in this position.
3
- Gear selector in Park. Illuminates when the gear selector is shifted to the parking position.
4
- Gear selector in Neutral illuminates when the gear selector is shifted to the NEUTRAL position.
5
- EPS Fault (This is for vehicle equipped with EPS).
6
- EFI Fault. This indicator light comes on when a fault occurs in the Electronic Fuel Injection system.
7
- Speed Limit Override. This indicator light comes on when pressing the override switch on the left-
hand control. Always exercise caution when using the override button.
8
- Gear Position ‘R-H-L’. This dashboard section displays the following letters that correspond to gear
selection: ‘R’= Reverse; ‘H’= High Gear; ‘L’= Low Gear.
9
- Engine Temperature. This dashboard section displays the current coolant temperature, ‘C’ is low
temperature, ‘H’ is high temperature, Both over-low and over-high are abnormal. Idle the vehicle to
warm the engine when it’s too cold, and park the vehicle when it’s too hot to prevent the coolant from
boiling. Keep the coolant temperature in a normal range.
To Next Page
Loading...
Need help?
General
