MAINTENANCE
100
Light
High beam and low beam light is adjustable. Rotate the light adjusting knob
1
to adjust light.
CAUTION
Adjustment of high / low beams should be accordance with local regulations. The light ray standard is
based on that front and rear wheels touch down the ground and driver sits on the vehicle.
All the lights are LED structure, which cannot be repaired if damaged or failed. Have your dealer replace
the entire assembly if an LED is damaged or has failed.
CAUTION
Do not leave the power turned on for a long time if engine will not be started. Headlight constantly on will
use battery capacity and cause the engine to fail to start.
1
1
To Next Page
