MAINTENANCE
77
Remove the oil fi lling screw plug
3
.
Fill with 1.27 qt (1.2 L) oil.
Remount the oil fi lling screw plug.
Start and idle the engine for several minutes, allowing the oil to
fl ow into the oil fi lter while checking for leaks.
Turn off the engine.
Inspect the oil level and adjust according to the level result.
Engine Oil Capacity
Change with oil fi lter: 1.27 qt (1.2 L)
Use of any oil other than those recommended may cause
serious engine damage. CFMOTO recommends the use of
15W-40/SG for 4-stroke engines. Changing engine oil viscosity
due to cold environments is acceptable. Reference the chart
below for ambient temperature and viscosity choice.
3
Oil
Viscosity
15W-40
10W-40
5W-40
Fº -22 -4 14 32 50 68 86 104
Cº
-30 -20 -10 0 10 20 30 40
To Next Page
