153
MAINTENANCE
Front and rear gear case
The front and rear gear case must be checked for oil leaks before
operating. If any leaks are found, have your dealer check and
repair the vehicle.
Front gear case oil check
1. Place the vehicle on a level surface.
2. Remove the oil ller bolt
1
and check the oil level. The level
should be up to the brim of the hole. If the level is low, add
sucient oil to raise it to the specied level.
3. Install the oil ller bolt and tighten it to 18.4 ft-lb. (25 N•m).
1
To Next Page