178
MAINTENANCE
Tail/brake, position, and turn signal lamp replacement
Brake/tail lights, front position lights, and turn signals (if equipped) are LED type. Have your dealer replace
the entire assembly if an LED is damaged or has failed.
License plate lamp replacement
If the license plate lamp has failed:
1. Pull the lamp holder from the rear of the license plate lamp housing.
2. Pull the failed bulb and replace it with a new bulb.
3. Reinstall the lamp holder into the rear of the license plate lamp housing.
4. Bulb Specication: 12V 5W W5W
CAUTION
Hot surface. Touch the bulb only after it has cooled down. Do not touch the bulb surface.
To Next Page