73
CONTROLS AND FEATURES
WARNING
Do not leave the ignition key inserted when the operator is away. An unauthorized use of the vehicle by
others may result in serious injury or death. Always remember to remove the ignition key when the vehicle is
not in use.
NOTE:
Do not keep the ignition key switch in ‘START’ for more than 10 seconds.
Speed Limit Override Switch -
7
The engine is normally speed limited when operating in 4WD-LOCK. If conditions require more engine
power:
• Release the throttle and press the button to override the speed limiting function. The override indicator
light will come on.
• Reapply the throttle while this button is pressed.
• Releasing the button restores the speed limiting function.
NOTE:
Speed limit override is not available in 2WD.
WARNING
Pressing the override button while the throttle is open in speed limiting mode may cause sudden
acceleration, resulting in a loss of control, severe injury, or death. Always release the throttle before pressing
the override button.
To Next Page
Loading...
