80
Cooling System
To Check the Coolant Level
1. Coolant reservoir cap
2. “Upper” mark
3. “Lower“ mark
1. Place the vehicle on a level surface.
2. Check the coolant level in the coolant res-
ervoir, as the coolant level in the coolant
reservoir varies with the engine tempera-
ture changes.
NOTE
Engine coolant level should be between the
upper and lower marks.
3. If the coolant level in the coolant reservoir
is below the lower mark, open the coolant
reservoir cap and add coolant to the upper
mark. Reinstall the coolant reservoir cap
and other removed parts.
NOTE
Coolant reservoir capacity at the lower mark:
0.23 L.
CAUTION
Tap water or sea water is harmful for the
engine, which can only be alternated as
coolant in special conditions temporarily.
CAUTION
If tap water or distilled water is alternated
as coolant temporarily, have your dealer
replace with specific coolant and inspect
the cooling system performance.
1
2
3
To Next Page
Loading...