CHAD EVOLUTION - Installing Alkaline Batteries


05:;(3305.(32(305,)(;;,90,:
The EVOLUTION
TM
conserver uses advanced technology that prolongs battery life through efficient
power use. With normal use of four (4) hours per day at any setting, your batteries should last a
minimum of 2 years.
Two (2) AA alkaline batteries are packaged in the box with your EVOLUTION
TM
conserver. Follow
these easy steps to install them:
:;,7! Use a Phillips head screwdriver to remove the battery door screw. [Fig E1]
:;,7! While holding the unit in one hand, gently press down on the battery door with your thumb
and open the hinge door away from the EVOLUTION™ label. [Fig E1 and E2]
:;,7! Drop the batteries into the slot, making sure they are inserted in the proper direction as
indicated by the (+) and (-) symbols. [Figs E3]
:;,7! Rotate the door cover back in place until a “click” is heard.
(::,4)3@(5+<:,
-0.<9,, -0.<9,, -0.<9,,
Changing
Alkaline
Batteries
 56;,! ;OL,=63<;065
;4
JVUZLY]LYPZWHJRHNLK^P[OIH[[LYPLZPUZPKL(ZWLJPHSZLHSPZ\ZLKH[[OLWVZP[P]L
 [LYTPUHS[VWYL]LU[IH[[LY`V_PKH[PVU0MP[OHZUV[HSYLHK`ILLUYLTV]LKI``V\Y/VTL*HYL7YV]PKLYIL
 Z\YL[VYLTV]L[OLZLHSILMVYL\ZPUN[OL\UP[MVY[OLMPYZ[[PTL