EasyManua.ls Logo

CHAD EVOLUTION - Monitoring Battery Energy Level:; Disposal of Batteries:; Installing the System:

CHAD EVOLUTION
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(::,4)3@(5+<:,
4650;6905.)(;;,9@,5,9.@3,=,3!
The EVOLUTION
TM
conserver is equipped with visual and audible low battery indication that alert
you when a battery change is needed.
Blinking red light – Low battery energy level. Replace batteries.
Audible alarm – Low battery energy level. Replace batteries.
+PZWVZHSVM)H[[LYPLZ! Do not dispose of used batteries in the household waste. Contact your public
waste disposal authority for proper disposal instructions.
05:;(3305.;/,:@:;,4!
:;,7! Loosen the valve adjustment knob.
:;,7! Lower the EVOLUTION
TM
conserver over any Pin Index
valve with the alignment pins toward the holes on
the cylinder valve [Fig. F].
:;,7! 
holes on the cylinder valve.
:;,7! While holding the unit in place, tighten the valve adjustment
knob by turning clockwise [Fig. F].
56;,! ;PNO[LUVUS`I`OHUK;OL\ZLVMH[VVS[V[PNO[LU[OLRUVI
TH`KHTHNL[OL\UP[
*(<;065If you are unable to eliminate leaks by manually tightening the

service.
:;,7! Attach a standard cannula to the medical oxygen supply outlet. See page 14 for an
illustration demonstrating the proper positioning of the nasal cannula.
-0.<9,-
Attaching the EVOLUTION
TM
conserver to the cylinder valve


Related product manuals