CHAD EVOLUTION - Operating Instructions:


(::,4)3@(5+<:,
67,9(;05.05:;9<*;065:!
:;,7! Make sure the EVOLUTION
TM
conserver is set to the “PULSE” position. Press the Power
 
:;,7! To reduce the risk of rapid oxygen recompression and fire, 67,5;/,*@305+,9=(3=, 
:36>3@ and completely so that the pressure gauge moves slowly as it indicates the
cylinder pressure.
:;,7!
reinstall. If the leak persists, +656;<:,;/,,8<074,5;. Contact your supplier for repair.
:;,7!
To select the flow setting on the EVOLUTION
TM
conserver (1-6) that corresponds to the
  
 
 5V[L!;VJOLJR`V\YJ\YYLU[ZL[[PUNWYLZZHUKYLSLHZL[OL-SV^:LSLJ[VY)\[[VUPU[OLJLU[LYVM[OL-SV^:LSLJ[VY2UVI
:;,7! Place the nasal cannula into position with the prongs in the nostrils and begin breathing
[Fig. G] The EVOLUTION
TM
conserver will now start to deliver medical oxygen. The amount
of medical oxygen delivered is determined by the flow setting.
 56;,! ;VOLSWWYL]LU[WVZZPISLKHTHNL[V[OL\UP[RLLW[OL,=63<;065
;4
JVUZLY]LYPUH
JHYY`PUNIHN:L]LYHSIHNZHYLH]HPSHISLMVY\ZL^P[OKPMMLYLU[J`SPUKLYZPaLZHUKJVUMPN\YH[PVUZ
:;,7! When finished using the system, turn off the medical oxygen supply
cylinder valve and continue breathing through the nasal cannula until
 
to turn off the unit.
:;,7! Remove the nasal cannula.
:;,7! When not in use, store the EVOLUTION
TM
conserver in a clean,
dry location.
Fig. G
Proper Positioning of
Nasal Cannula