5
3. Operation
SR160 is a scanning gun device with RFID function. Its working principle is to
directly output the scanned data to the cursor position. As long as the
application is opened and the cursor position is located, the identified data
can be output through the RFID scanning gun.
4. Functions
The SR160 scanning gun has three working modes:
1).RFID mode only enables RFID function, and the RFID reading data
shall prevail. Switch the function to RFID mode through the yellow
switch button on the back of the device. RFID mode light is on and the
BARCODE mode light is off. The reading is successful, and the
corresponding RFID top indicator is on.
2).Barcode mode
Only the barcode function is enabled, subject to the barcode reading
data. Switch function to BARCODE mode through the yellow switch
button on the back of the device, and the BARCODE mode light will be
on and the RFID mode light will be off. The reading is successful, and
the corresponding BARCODE top indicator is on.
To Next Page
Loading...