Challenge Xtreme CC200ESV - User Manual

200W Orbital Sander
CC200ESV
ALWAYS READ THESE OPERATING INSTRUCTIONS PRIOR TO USE
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
MADE IN CHINA
1
GENERAL SAFETY RULES
WARNING! Read all instructions Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury. The term "power tool" in
all of the warnings listed below refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
The manufacturer shall not be liable for any changes made to the tool nor for
any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all
residual risk factors. The following hazards may arise in connection with the
tools construction and design:
• Damage to the lungs if an effective dust mask is not worn
• Damage to hearing if effective ear defenders are not worn
• Always remove the plug from the power point before making any
adjustments or maintenance, including changing the sandpaper.
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of

Challenge Xtreme CC200ESV Specifications

General

Brand	Challenge Xtreme
Model	CC200ESV
Category	Sander
Language	English

Summary

General Safety Rules

Work Area Safety

Guidelines for maintaining a safe and well-lit workspace and keeping others away.

Electrical Safety Precautions

Essential precautions for safe use, covering plugs, grounding, and cord handling to prevent shock.

Additional Safety Rules for Sanders

Product Details and Specifications

Component List and Accessories

Identifies the parts included with the orbital sander and the available accessories for user recognition.

Technical Specifications

Provides key technical data like voltage, wattage, pad size, speed, noise, and vibration levels.

Operating Instructions

Mounting Sandpaper Sheets

Step-by-step guide on how to correctly attach sanding sheets to the sander's pad.

Selecting Sandpaper Grade

Advice on choosing the appropriate grit sandpaper for different finishing tasks.

Sanding Procedure

Instructions on proper sanding technique, pressure, and motion for optimal results.

Dust Extraction System Use

Guidance on using dust bags or vacuum cleaners for effective dust collection during sanding.

Maintenance and Plug Fitting

General Inspection and Maintenance

Routine checks for screws, cords, air vents, and cleaning procedures for tool longevity.

Plug Fitting Instructions

Guidance on wiring a new plug, including color coding and fuse recommendations.

Environmental Protection and Guarantee

Environmental Protection Advice

Recommendations for recycling unwanted materials and disposing of tools environmentally.

Product Guarantee Information

Details on the 12-month guarantee, coverage, and procedures for returns or replacements.