EasyManua.ls Logo

Challenge M0E-9ET-410 - Operational Safety Practices; Damaged Parts and Repair Safety; Tool Storage and Maintenance

Challenge M0E-9ET-410
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
Safety Information
Important - Please read these instructions fully before starting assembly
9. Do not overreach. Keep proper footing and balance at all times.
10. Stay alert, watch what you are doing. Use common sense when operating the appliance.
Do not operate the tool when you are tired.
11. Grip the tool securely. Operator should have one hand on the main handle, the other on the
front handle. Keep nger off trigger until ready to use.
12. Remove adjusting keys and wrenches. Always check that adjusting keys and wrenches are
removed from the tool before operating the tool.
13. Risk of cut. Do not try to grasp or remove trimmings when the product is running. Only
remove trimmings when the product is switched off and disconnected from the power supply.
14. Disconnect the battery. Disconnect battery from the tool when not in use or when servicing
or cleaning.
15. Check for damaged parts. Before further use, carefully check the tool for damage.Check
for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any
other condition that may affect its operation. Do not use the tool if any parts are damaged or
defective. Have any damaged or defective parts repaired or replaced by an authorized service
agent. Never attempt any repairs yourself.
16. Store idle tools. When not in use, tools should be stored in a dry, locked-up place out of
reach of children.
17. Maintain tools with care. Keep tools clean and in good condition for better and safer
performance. Follow the instructions for maintenance and changing accessories. Keep
handles and switches dry, clean and free from oil and grease.
18. Have your tool repaired by an authorized service agent. This tool is manufactured in
accordance with the relevant safety regulations. To avoid danger, electrical appliances must
only be repaired by qualied technicians.
WARNING!
Do not use any attachments or accessories not recommended by the manufacturer of this tool.
The use of attachments or accessories not recommended can result in serious personal injury.
General Power Tool Safety Warnings

Related product manuals