EasyManua.ls Logo

Challenge M0E-9ET-410 - User Manual

Challenge M0E-9ET-410
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Original Manual
CHALLENGE
18V Li-ion Pole Cordless Hedge Trimmer
M0E-9ET-410
Important - Please read these instructions fully before starting assembly and using.
These instructions contain important information that will help you get the best from your pole
hedge trimmer, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline on 01904 727503
prior to returning product to store.
Aug 2016 Rev A
Question and Answer IconNeed help?

Do you have a question about the Challenge M0E-9ET-410 and is the answer not in the manual?

Summary

Introduction

Intended Use

Describes the intended purpose and limitations of the hedge trimmer.

Safety Information

General Power Tool Safety Warnings

Provides general safety instructions for operating power tools.

User Responsibilities and Restrictions

Specifies user responsibilities and limits for operating the appliance.

Personal Protective Equipment

Recommends wearing safety glasses, gloves, and appropriate attire.

Operational Safety Practices

Stresses alertness, secure grip, avoiding overreach, and removing tools.

Damaged Parts and Repair Safety

Advises inspecting for damage and using authorized repair services.

Tool Storage and Maintenance

Provides guidance on storing and maintaining the tool.

Battery and Charger Safety

Provides specific safety guidelines for batteries and chargers.

Battery Handling Precautions

Covers battery integrity, leakage, and contact safety.

Charger Safety Rules

Details safety rules for using the charger, including plug, cord, and water precautions.

Hedge Trimmer Operational Safety

Warns of serious injury hazards and safe operating practices for the trimmer.

Advanced Trimmer Safety

Covers PPE, guards, two-hand operation, and awareness of surroundings.

Blade Contact and Emergency Procedures

Warns against blade contact and outlines emergency response.

Residual Risks and Electromagnetic Field Warning

Discusses residual risks and alerts to electromagnetic field hazards.

Warning Symbol Explanations

Explains the meaning of various warning symbols used in the manual.

Additional Warning Symbols and High Voltage Warning

Explains further symbols and warns about high voltage lines.

Vibration Syndrome Risk Warning

Warns of the risk of hand-arm vibration syndrome from prolonged use.

Parts List

Component Identification

Lists and identifies all components of the hedge trimmer.

Assembly

Battery Charging Procedures

Instructions and warnings related to charging the battery.

Unattended Charging Warning

Strong warning against leaving the battery and charger unattended.

Battery Pack Installation

Step-by-step guide for inserting the battery pack into the tool.

Operation

Switching Trimmer On and Off

Explains how to turn the hedge trimmer on and off.

Telescopic Handle Adjustment

Explains how to adjust and lock the telescopic handle.

Swivel Cutter Head Function

Explains how to adjust and lock the cutting head angle.

Cutting Capacity Limit Warning

Warns not to exceed the product's cutting capacity.

Maintenance and Storage

Blade Lubrication and Cleaning

Instructions for lubricating and cleaning the cutting blades and trimmer.

Tool Storage Guidelines

Guidelines for storing the hedge trimmer safely.

Troubleshooting

Trimmer Not Operating Diagnosis

Steps to diagnose and fix issues where the trimmer does not start.

Battery Charging Issues Troubleshooting

Steps to troubleshoot battery charging problems.

Technical Data

Product Specification Table

Presents detailed specifications of the hedge trimmer and its components.

Noise and Vibration Data

Provides measured noise and vibration levels.

Recycling and Disposal

Disposal Guidelines Overview

Provides guidelines for environmentally sound disposal of the product and packaging.

Electronic and Battery Item Disposal

Instructions for disposing of electronic and battery items separately.

Guarantee

Guarantee Terms and Conditions

Outlines the terms and conditions of the product guarantee.

Proof of Purchase Requirement

Specifies the need for proof of purchase for claims.

Overview

This document is the original manual for the CHALLENGE 18V Li-ion Pole Cordless Hedge Trimmer, model M0E-9ET-410. It provides comprehensive instructions for assembly, operation, maintenance, and safety, ensuring users can effectively and safely utilize the tool.

Function Description:

The CHALLENGE 18V Li-ion Pole Cordless Hedge Trimmer is designed for trimming light foliage, hedges, bushes, and shrubs in private domestic settings. It is not intended for commercial or industrial use, nor for cutting non-plant material or branches exceeding its stated maximum capacity. The pole design allows for trimming hard-to-reach areas. The cutter head features a swivel function, enabling it to be locked in five different positions for versatile trimming angles. The telescopic handle further enhances its reach and adaptability.

Important Technical Specifications:

  • Model: M0E-9ET-410
  • Voltage: 18V DC
  • Battery Type: Lithium-Ion
  • No Load Speed: 1400/min
  • Cutting Length/Capacity: 410mm/14mm
  • Battery Pack Model: ET-D1806
  • Battery Capacity: 1.5Ah
  • Charging Time: Approx. 4 Hours
  • Charger Model: JLH122100400B
  • Charger Rated Voltage: 230-240V~/50Hz
  • Charger Nominal Consumption: 15W
  • Charger Output Voltage: 21V DC
  • Charger Output Current: 400mA
  • Charger Protection Class: Class II
  • Charger Protection Category: IPX0
  • Sound Pressure Level: 83.5 dB (A) K PA: 3dB (A)
  • Sound Power Level: 92.52 dB (A) K WA: 3dB (A)
  • Guaranteed Sound Power Level: 96 dB(A)
  • Vibration Level (ah): 1.367 m/s²
  • Uncertainty K: 1.5 m/s²

Usage Features:

  • Cordless Operation: Powered by an 18V Lithium-Ion battery pack, offering freedom of movement without the constraint of power cords.
  • Pole Design: Extends reach for trimming high hedges and bushes.
  • Swivel Head: The cutter head can be adjusted and locked into five positions: -45°, -22.5°, 0°, 22.5°, 45°, and 67.5°. This allows for precise trimming at various angles and heights. To adjust, hold the handle (D), push the lock button (E), and turn the cutter head (F) to the desired position.
  • Telescopic Handle: The handle length can be extended or retracted by turning the clamping bolt (C) to "UNLOCK" and then to "LOCK" once the desired length is achieved.
  • Safety Lock-off Button: Requires pressing and holding the safety lock-off button (A) before pressing the start button (B) to operate, preventing accidental startup.
  • Shoulder Strap: Includes a shoulder strap for comfortable use and to distribute the tool's weight, reducing operator fatigue. The hook of the shoulder strap fixes into the lifting lug on the handle pole.
  • Battery Indicator: The charging station features an LED (9) that indicates charging status (green for ready/fully charged, red for charging).
  • Intended Use: Specifically designed for trimming hedges outdoors on private property. Users are advised to adhere to the maximum cutting capacity and avoid cutting non-plant material.

Maintenance Features:

  • Blade Lubrication: For optimal performance and extended life, the cutting blades should be lubricated before and after each use. Any lubrication oil can be applied to run between the two blades. Ensure the battery is disconnected before lubrication.
  • Cleaning: The hedge trimmer should be cleaned immediately after each use to maintain performance. A soft damp cloth should be used; avoid water, chemicals, petrol, or solvents, as these can damage the tool. Special attention should be given to cleaning the cooling vents and ensuring the blade is free of cuttings and debris.
  • Storage: Store the hedge trimmer in a clean, dry place, out of reach of children. Always fit the transportation blade sheath when storing the tool to protect the blades and prevent injury.
  • Battery Care:
    • Charge the battery pack in temperatures between 18-24°C for longest life and best performance.
    • Allow hot battery packs to cool for approximately 30 minutes before recharging after continuous use.
    • Do not cover the charger or charge battery packs in direct sunlight or near heat sources.
    • If the battery pack does not charge properly, check the main socket, ambient temperature, and if problems persist, contact a service center.
    • Recharge the battery pack when it fails to produce sufficient power; do not continue to use it under insufficient power.
    • Do not immerse the charger in water or any other liquid.
    • Never attempt to open the battery pack. If the housing is damaged, return it to a service center for recycling.
  • Troubleshooting: The manual provides guidance for common issues such as the trimmer not operating (check battery assembly and charge), battery not charging (check insertion and power supply), and trimmer not cutting properly (check blade condition). For faults, return the trimmer to an authorized dealer for repair.
  • Authorized Service: Repairs should only be carried out by qualified technicians or authorized service agents to ensure safety and compliance with regulations. Do not attempt repairs yourself.
  • Regular Checks: Regularly check blades for damage and wear. Do not use the machine with damaged blades. Inspect the tool for alignment of moving parts, binding, breakage, and any other condition that may affect operation before each use.

Challenge M0E-9ET-410 Specifications

General IconGeneral
BrandChallenge
ModelM0E-9ET-410
CategoryTrimmer
LanguageEnglish

Related product manuals