Challenge M0E-9ET-410 - Introduction; Intended Use; Safety Information; General Power Tool Safety Warnings

3
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
Thank you for purchasing a CHALLENGE pole hedge trimmer. We hope you are completely satised with
your new product and hope you will enjoy using this tool for many years. Your M0E-9ET-410 pole Hedge
Trimmer has been designed for trimming light foliage and is intend for DIY use only.
This Li-ion hedge trimmer M0E-9ET-410 is intended for trimming hedges, bushes and shrubs. Observe the
technical data for the maximum cutting capacity. Do not cut non plant material or branches exceeding the
stated maximum capacity. For safety reasons it is essential to read the entire instruction manual before rst
operation and to observe all the instructions there in. This product is intended for private domestic use only,
not for any commercial trade use. It must not be used for any purposes other than those described.
Read all instructions. Failure to follow all instructions listed below may result in electric shock,
re and/or serious injury. The term “power tool” in all warnings listed below refers to your mains
operated power tool.
1. Read the instruction carefully. Be familiar with the controls and the correct use of the
appliance. Read and understand the operator’s manual and observe the warnings and
instruction labels afxed to the appliance.
2. Users. Never allow children or people unfamiliar with these instructions to use the appliance.
Local regulations may restrict the age of operator. Never operate the tool under the inuence
of alcohol, medication or drugs.
3. Use appropriate tool. This device is only intended for trimming hedge outdoors and only
designated for use on private property. Do not force small tools or attachments to do the job of
a heavy duty tool.
4. Keep work areas clean. Cluttered areas can cause accidents.
5. Consider work area environment. Do not expose the tool to high humidity or rain. Do not
use the tool in damp and wet conditions.Keep the work area well lit. Do not use the tool where
there is a risk of causing re or explosion, e.g. in the presence of ammable liquids and gases.
6. Keep all bystanders, children, and pets away. The operator or user is responsible for
accidents or hazards occurring to other people or the property.
7. Dress appropriately. Do not wear loose clothing, hair or jewelry, as these can be caught in
moving parts. Preferably wear non-slip footwear when working outdoors. Wear protective hair
covering to keep long hair out of the way.
8. Head protection. Always use safety glasses and gloves. Use a face or dust mask whenever
the operations may produce dust or ying particles. Wear ear protection whenever the sound
level seems uncomfortable.
Important - Please read these instructions fully before starting assembly
Intended Use
Introduction
Safety Information
General Power Tool Safety Warnings