Challenger MT738 - Page 7

3.12.6.1 Accuterminal Main Menu ................................ 1
69
3.12.6.2 Data exchange ........................................170
3.13 Implement settings ................................................ 171
3.13.1 Install a rear-mounted implement ....................................172
3.13.2 Find the implement settings ....................................... 174
3.13.3 Set the working width ............................................175
3.13.4 Rear-mounted implement settings ................................... 178
3.13.5 Set the coupling length ........................................... 178
3.13.6 Set the center of the rear-mounted implement .......................... 180
3.13.7 Rear-mounted implement trigger settings ............................. 183
3.13.8 Load the implement settings .......................................183
3.13.9 Save the implement settings .......................................184
3.13.10 Settings that can be saved ........................................ 185
3.14 Exchange implement data and field data .............................187
3.14.1 Plug in the USB stick and call up data exchange ......................... 187
3.14.2 Insert USB stick ................................................ 187
3.14.3 Call up the data exchange ......................................... 187
3.14.4 Data exchange information ........................................ 188
3.14.5 Select and transfer individual data to the USB stick ...................... 189
3.14.6 Select and transfer all data to the USB stick ............................ 190
3.14.7 Select and transfer individual data from the USB stick .................... 192
3.14.8 Select and transfer all data from the USB stick .......................... 193
3.15 Tractor Management System ........................................195
3.15.1 Store engine speeds .............................................195
3.15.2 General tractor management .......................................195
3.15.3 Tractor management system (TMS) .................................. 196
3.15.4 Accelerator pedal - operation ....................................... 197
3.15.5 Set TMS engine speed range ...................................... 198
3.15.6 Activate the Tractor Management Systems (TMS) ....................... 198
3.15.7 Reversible fan ................................................. 199
3.15.8 Set the reversible fan intervals ..................................... 200
3.15.9 Manually activate the reversible fan .................................. 201
3.16 Valve settings ......................................................203
3.16.1 Locking individual valves .......................................... 203
3.16.2 Set the time function ............................................ 203
3.16.3 Priority function ................................................ 204
3.16.4 Set the valve response sensitivity ................................... 205
3.16.5 Set the flo
w rate ............................................... 206
3.16.6 Activate the external valve operation ................................. 206
3.16.7 Set the float position ............................................ 207
3.16.7.1 Set the float position on and o for the linear module valves ...... 208
3.17 Terminal operations for the 3-point linkage .......................... 209
3.17.1 Call up the 3-point linkage menu .................................... 209
3.17.2 Rear 3-pt hitch ................................................. 210
3.17.3 Rear 3-pt hitch details ............................................ 211
3.17.4 Power take-o and 3-point linkage control ............................. 211
3.17.5 Lock and unlock the 3-point linkage .................................. 212
3.17.6 Prioritize the 3-point linkage ....................................... 214
3.17.7 Set the lift height limit ........................................... 214
3.17.8 Set the raise/lower speed ......................................... 215
3.17.9 Shock load stabilizing system ...................................... 215
3.17.10 Set the shock load stabilizing system .................................216
3.17.11 Set the position-tractive power-mix control .............................216
3.17.12 Electronic slip control system (optional) ............................... 216
3.17.13 Activate the slip control system .....................................217
3.17.14 Set the slip target value .......................................... 219
3.17.15 Set the sensitivity of the slip control system ........................... 219
Table of contents
Rubber Track Tractor
589607D1G
Find manuals at https://best-manuals.com