Need help?Do you have a question about the Challenger MT855C and is the answer not in the manual?
General| Rated RPM | 2100 rpm |
|---|---|
| Displacement | 18.1 L |
| Transmission Type | Powershift |
| PTO Type | Independent |
| PTO Speed | 1000 rpm |
| Tire Options (front/rear) | Tracks |
| Number of Gears | 4 reverse |
| Hydraulic System Type | Closed center |
| Three-Point Hitch Category | III |
| Engine Type | Caterpillar C18 ACERT diesel |
| Fuel Capacity | 757 L (200 US gal) |
| Hydraulic Pump Flow | 227 L/min (60 US gpm) |
Measurements given in metric units followed by U.S. units. Hardware sizes in mm and inches.
To receive prompt service, have correct part number, description, model, and serial number.
General safety guidelines and warnings for operation, maintenance, and repair.
Explains safety alert symbols, signal words (DANGER, WARNING, CAUTION), and informational messages.
Details common hazards and precautions for operation, mounting, engine, fluids, fire, and electrical storms.
Explains the purpose of machine identification numbers.
Identifies locations of various serial number plates for machine identification.
Covers constant torque hose clamps, general fasteners, and inch fasteners with torque values.
Guidelines for proper tightening of hydraulic fittings to prevent leaks and damage.
To Next Page